Posts: n/a
06-15-05, 10:39 AM
#1
radye5
MTD chipper/shredder
Have recently acquired a used 5hp. MTD chipper/shredder (245-650-000). It has a new blade but the clearance between the blade and the cutting plate is about 1/4 to 3/8 inch. This seems excessive but I am not familiar with this type of machine. Is this amount of clearance about right?
It seems to run slow-- about 1000-1500 rpm. Is this speed about right?
Thanks,
radye5
It seems to run slow-- about 1000-1500 rpm. Is this speed about right?
Thanks,
radye5
Sponsored Links