Snapped slow speed jet in side of Tecumseh carb.


Old 10-22-05, 07:11 PM
Visiting Guest
Posts: n/a
Snapped slow speed jet in side of Tecumseh carb.

Well today I was going to rebuild a carb of a Tecumseh engine . The carb is very weathered. I removed the bowl with no problem. When I started to remove the slow speed jet on the side it was really frozen. I gave it a little more pressure with my wrist and SNAP ! I snapped the head off the jet. Now the jet is stuck in the side of the carb. Any tips on how I can get it out ?? Thanks in advance.
Sponsored Links
Old 10-22-05, 09:13 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,814
Best bet would be to buy another carb. I doubt you'll ever get it out without messing up the carb, and it would take more time and effort than a new one's worth.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes