Craftsman Trimmer Carb Adjustment needed

Reply

  #1  
Old 12-05-05, 10:31 PM
sschulte
Visiting Guest
Posts: n/a
Craftsman Trimmer Carb Adjustment needed

I have a Craftsman trimmer model # 358.798530 that needs a carb adjustment. The carb has two adjustment screws...idle and a mixture. The owners manual says to start by turning the idle speed screw out by 4.5 turns and turn the mixture screw out until it stops. But I am missing the limiter cap on the mixture screw so I don't know how far to turn it. Can someone tell me a good starting point for the mixture screw?

Thanks
Steve
 
Sponsored Links
  #2  
Old 12-06-05, 02:45 AM
puey61's Avatar
Member
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
I don't know which series carburetor you have and the break-down doesn't help either...so, start out at 2 turns out and adjust from there. Allow the engine to warm up to operating temperature (3-4 minutes) and listen for a good 2-cycle sound at top RPM.
 
  #3  
Old 12-06-05, 11:30 AM
sschulte
Visiting Guest
Posts: n/a
I check the carb and it has WA-227 stamped on the bottom. I guess this is the model. It is a Walbro. It also has N27 stamped in another place.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes