Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Snow blower blades not engaging


Frank54's Avatar
Member

Join Date: Mar 2005
Posts: 7

12-10-05, 03:51 AM   #1  
Snow blower running very rough

My 21 inch 2 cycle snow blower just started running extremely rough. There is a little oil residue coming out of the exhaust pipe. I use one gallon of gas to 4 oz. of oil. It has been running fine for the last 5 years. What could the problem be?


Last edited by Frank54; 12-10-05 at 01:24 PM. Reason: I corrected the first problem I posted
 
Sponsored Links
repair_guy's Avatar
New Member

Join Date: Apr 2004
Posts: 539
AL

12-10-05, 05:23 PM   #2  
Sounds like the carb. might need a little adjusting.Bring the high speed screw out about 1/8 to 1/4 turn.Also check to see if the muffler and exhoust ports are clear.if engine not running right blades wont do right ether.

PS-Take a look at your owners manuel again,I've never had to put more than 3.5 ounces of oil to a gal.of 2 cycle fuel.(any brand name engine)

 
Search this Thread