Carburerator Adjustment

Reply

  #1  
Old 12-18-05, 07:24 AM
spabob
Visiting Guest
Posts: n/a
Carburerator Adjustment

I have a 1998 Sears Chipper/Shredder with an 8.5 hp Tecumseh engine. What are the proper adjustments to the carburerator?
 
Sponsored Links
  #2  
Old 12-18-05, 11:27 AM
v8driver's Avatar
Member
Join Date: Sep 2005
Posts: 767
1.5 turns out from snug, not wrenched in, you can damage the needles tips, then it'll need new adjustment screws. thats just a baseline to get it running, get it warmed up and fine tune, should handle without much lagging, being thrown to full throttle quickly.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes