Wiring Question on Briggs motor


Old 02-17-06, 06:15 PM
Thread Starter
Join Date: Feb 2006
Posts: 3
Wiring Question on Briggs motor

I had a senior moment when disassembling my Briggs and Stratton 6hp motor.
Model # 120312. I can't remember where the black wire from the induction pick up (coil) connects to. It has a spade connector on the end that attaches to the coil and another spade on th other end. This motor runs a generator.
Sponsored Links
Old 02-17-06, 10:25 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
The other end connects to the kill switch, or if it has a low oil sentry, it connects there.
Old 02-21-06, 05:46 AM
Visiting Guest
Posts: n/a
Talking Amen

AND AMEN , thats it

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes