Need valve clearance on B&S 3.5 hp

Reply

  #1  
Old 04-19-06, 10:43 AM
Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Need valve clearance on B&S 3.5 hp

What should the valve clearance be on a B&S 3.5 hp motor? I have redone the valves as the intake was burnt and I could only get the tiller to run by priming the carb. Also, while I have it apart I want to put in new points and cond. What should the clearance on the points be?

Thanks

Bill
 
Sponsored Links
  #2  
Old 04-19-06, 02:06 PM
Member
Thread Starter
Join Date: Apr 2006
Posts: 5
Found the answers

Found what I needed.

Thanks
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes