Lawn Boy Starter Cord Replacement

Reply

  #1  
Old 04-21-06, 06:40 PM
Member
Thread Starter
Join Date: Apr 2006
Posts: 1
Question Lawn Boy Starter Cord Replacement

I need help. My starter cord frayed and snapped. I have new length of cord but cannot figure out how to get into the reel housing to attach the cord and wind it on the spool. All plastic guards removed. The reel is attached with 4 or 5 rivet. How do you replace the cord?

Lawn Boy Silver series Model 10316
 
Sponsored Links
  #2  
Old 04-22-06, 12:08 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,817
Pull the entire piece off, not just the riveted part, but the whole engine shroud. Then, remove what's left of the old rope, wind the spool up, insert new rope and tie knot and let it rewind the new cord into the spool.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes