craftsman mower

Reply

  #1  
Old 05-12-06, 10:43 AM
Member
Thread Starter
Join Date: Apr 2005
Location: USA
Posts: 60
craftsman mower

I have a 4.5 HP lawn mower and just had the rip cord break near where it attaches at the engine. I have taken it apart but I am stumped on how to put it back together properly. Thanks
 
Sponsored Links
  #2  
Old 05-12-06, 02:55 PM
repair_guy's Avatar
New Member
Join Date: Apr 2004
Location: Marion,Al.
Posts: 539
If you haven't taken the spring or pulley out,all you have to do is wind the spring all the way as far as it will go,let it turn back one complete revolution and slide the rope through the housing and hole in starter pulley and tie a knott in it.(burn it a little so the knott wont come lose)
 
  #3  
Old 05-12-06, 09:56 PM
Member
Thread Starter
Join Date: Apr 2005
Location: USA
Posts: 60
I didnt even see that hole in the pulley! Thanks!
 
Reply


Thread Tools
Search this Thread
Display Modes
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 07:23 PM.