P/Washer emmitting smoke

Reply

  #1  
Old 08-12-06, 05:51 PM
Member
Thread Starter
Join Date: Oct 2005
Location: portland
Posts: 48
P/Washer emmitting smoke

Troy-built p/w, B/S engine. Borrowed p/w from friend, he told me to change pump oil as well as reg oil since it has not been done. Followed instructions as read in book. It started just fine, and 10-15 secs later engine stopped and black smoke came out of exaust (lots of it). It also seemed that there is oil residue around exaust holes. Could I have put to much oil in? I should have just rented a damn p/w instead of waiting for 2 weeks to get this one. I hope I didn't fry it up. Please help. Much appreciated. Mike
 
Sponsored Links
  #2  
Old 08-13-06, 08:38 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,814
Check the oil level. What's it say?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes