Mcculloch fuel problem?


Old 11-11-06, 09:28 AM
Thread Starter
Join Date: Nov 2006
Posts: 1
Mcculloch fuel problem?

have powermac saw with following problem. starts fine if heavily primed or fuel squirted down carb. wont run for more than 5 seconds (full throttle) then seems to run out of fuel. have clean fuel (50:1), checked fuel lines and filter. so is it maybe reed valves or crankcase seals or?
Thanks Ian
Sponsored Links
Old 11-11-06, 09:29 AM
puey61's Avatar
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
No, the carburetor will need to be removed, disassembled and reconditioned using the correct OE carburetor kit.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes