DoItYourself.com Community Forums > Cars, SUV's, Vans, Trucks, RV's, Boats and Gasoline Outdoor Power Equipment > Outdoor Gasoline and Electric Powered Equipment and Small Engines

Need a manual for a Murray Snowblower

Thread Tools

Search this Thread

04-12-07, 07:13 PM

AAK05

Member

Thread Starter

Join Date: Apr 2007

Location: Perry Hall

Posts: 3

Upvotes: 0

Received 0 Upvotes on 0 Posts

Need a manual for a Murray Snowblower

I know that the owner/operator manual is no longer available from Murray or B&S. I need a manual for a Murray Ultra 22" 5HP Snowblower Model #622505X8. I was hoping that I could find somebody that has a manual and could make a copy for me.

Thanks

Upvote

01-18-11, 07:39 PM

Cyndrich

Member

Join Date: Jan 2011

Location: USA

Posts: 1

Upvotes: 0

Received 0 Upvotes on 0 Posts

I know that this is an old question, but did you ever find the manual? I also am in need of one for the same snowblower.

Upvote

01-18-11, 08:28 PM

lawrosa

Super Moderator

Join Date: Dec 2010

Location: Galivants Ferry SC USA

Posts: 15,984

Upvotes: 27

Received 79 Upvotes on 71 Posts

Murray st Parts Diagram Index for 622505X8

Mike NJ

Upvote

Thread Tools

Search this Thread

Show Printable Version

Email this Page

Outdoor Gasoline and Electric Powered Equipment and Small Engines
Ariens 8.5 hp ST5520 Won't Pull Start

P

paul3624 on Jan 16, 2011

My Arien's doesn't seem to want to pull start. Will start fine with the electric starter, but but won't start with the rope. It's a Briggs & Stratton engine. Thanks, PaulRead More
Outdoor Gasoline and Electric Powered Equipment and Small Engines
Tecumseh HSSK50 Carb Leaking Fuel

H

HappyInPa on Jan 12, 2011

I have a snapper snow thrower with a Tecumseh HSSK50 engine. When I open the fuel cut off valve, gas leaks out of the top of the carb. I have also noticed gas coming out of the primer. I removed the primer line, plugged the opening on the carb with my finger, opened the fuel cut off and no gas leaked. I put the primer line back on and let it drain into a container, opened the fuel cut off valve and gas just poured through the line into the container. Is my problem either the primer, primer line or something in the carb itself? Any help would be appreciated.Read More

Ask a Question