Murray garden tractor
#1
Member
Thread Starter
Join Date: Jun 2007
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Murray garden tractor
I have a murray garden tractor, 42" cut 16hp. The engine will turn over but there is no spark to the plugs. I have changed the seat switch, clutch switch, ignition switch, IPO switch and the fuse under the seat, but there is still no spark to the plugs. Does anyone have any idea what is wrong with it. Thanks
#2
Did you check the ignition coil? Remove the blower shroud, unhook the kill circuit from the coil (thus eliminating any safety switches) and then check for spark. Be advised you will not be able to turn the engine off with the key switch with the kill circuit unplugged. If still no spark, replace the coil.
Last edited by msidan; 06-02-07 at 06:06 PM. Reason: Added more info