craftsman mini-tiller


Old 06-10-07, 06:30 PM
Thread Starter
Join Date: Jun 2007
Posts: 1
craftsman mini-tiller

When I pull the cord it does not engage the engine. Just pulls freely. Any ideas what is wrong?
Sponsored Links
Old 06-10-07, 08:48 PM
repair_guy's Avatar
New Member
Join Date: Apr 2004
Location: Marion,Al.
Posts: 539
Sounds like the plastic, starter pulley is wore ouy or the starter pawls is.Or the springs (on the flywheel) that through the starter pawls out to engauge with the starter pulley is weak, broken, or frozen in the disengauge position.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes