Murray Rider Parts interchangable?


Old 07-12-07, 06:38 AM
Thread Starter
Join Date: Jul 2007
Posts: 1
Murray Rider Parts interchangable?

I have an ancient 1980 model 3-36508 36 inch cut Murray rider with the 11 hp B&S engine. I need jackshafts and spindles but can't find them in the parts listings at Outdoor Distributors and B & S. They have parts for a 38" deck but don't seem to know if the deck parts for a 38" deck will fit my 36" deck. Does anyone know? Thanks
Sponsored Links
Old 07-12-07, 12:51 PM
Join Date: Jan 2007
Posts: 23
See if this is what your looking for
Old 07-12-07, 11:51 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,819
I don't have numbers on hand, but as I recall, the parts are similar but not the same. I believe the 36" older jackshafts are keyed instead of splined like the 38s, and the mandrel housings have 2 different bearings on the newer 38, but the bearings are both the same size on the older 36s.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes