Weedeater Two Cycle Edger

Reply

  #1  
Old 07-31-07, 07:48 PM
Member
Thread Starter
Join Date: Jul 2005
Location: Texas
Posts: 205
Red face Weedeater Two Cycle Edger

I took the carb. off to clean it and took the H and L mixture screws out and laid them in a try to be clean,not looking at them because I do know the difference in the two,after cleaning them I started to rebuild the carb. and notice that there was no difference in the size of the screws,or the holes in the carb. is it possible that this carb. could have the same H and L mixture screws, it's a Walbro WT630,I did look at them with a magnifying glass,and there was no difference,even had my wife look at them too could not tell the difference.

Thanks,
Jerry
 
Sponsored Links
  #2  
Old 08-01-07, 07:14 PM
30yearTech's Avatar
Member
Join Date: Oct 2006
Location: Central Texas
Posts: 1,176
After looking at the illustrated parts list for your carburetor, I think that the two adjustment screws are the same. The parts breakdown shows it available as a kit with the needles and limiter caps.
 
  #3  
Old 08-02-07, 05:32 AM
Member
Thread Starter
Join Date: Jul 2005
Location: Texas
Posts: 205
Smile

Thanks, 30yeartech,did you find the parts list at walbro and click on aftermarket.

Jerry
 
  #4  
Old 08-02-07, 06:54 AM
30yearTech's Avatar
Member
Join Date: Oct 2006
Location: Central Texas
Posts: 1,176
Yes, thats where I looked it up.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes