Stihl edger

Reply

  #1  
Old 10-02-07, 07:17 PM
Member
Thread Starter
Join Date: Jul 2003
Location: Montevallo, Alabama
Posts: 590
Stihl edger

Could someone tell me wheather the nut holding the blade on is right handed or left handed threads? The edger is a Stihl FC75.
 
Sponsored Links
  #2  
Old 10-03-07, 11:42 AM
puey61's Avatar
Member
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
I don't know the configuration of your model but in all the trimmers I've ever serviced straight shaft trimmers will have a left-hand thread and curved shaft models will be a standard, right-hand thread.
 
  #3  
Old 10-03-07, 06:26 PM
Member
Thread Starter
Join Date: Jul 2003
Location: Montevallo, Alabama
Posts: 590
Stihl edger

Thanks Puey for the rapid response.
 
  #4  
Old 10-03-07, 10:00 PM
repair_guy's Avatar
New Member
Join Date: Apr 2004
Location: Marion,Al.
Posts: 539
Jack, if memery serves it comes off to the right.It's been a good little while since I had one of thoes to work on.Take a close look at the threads you'll be able to tell.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes