Snowblower won't pull start
#1
Member
Thread Starter
Join Date: Oct 2007
Posts: 13
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Snowblower won't pull start
have a craftsman snow blower that i am currently rebuilding. right now it will only start when power cord is hooked into it. it won't pull start. when it does start with the cord it takes a few seconds of cranking it before it turns over. maybe the pull start isn't moving the gas properlly? i am at a loss here. problem is when/if the blower shuts off (hopefully won't now that i have rebuilt the carb), i have to push it all the way back to my garage to start again. any suggestions as to where i might start???>>??