MTD/Craftsman snowblower idler


Old 01-10-08, 06:04 PM
Thread Starter
Join Date: Jan 2008
Posts: 1
MTD/Craftsman snowblower idler

New MTD/Craftsman snowblower idler assembly has a torsion spring that unwound during belt replacement (Broke - first time out) Cannot find detailed diagram to re-mount the spring. I suspect that spring was improperly installed allowing belt to break by leaving its v-groove. Any insight or sketch greatly appreciated. Model # 247-88190.0
Sponsored Links
Old 01-10-08, 06:47 PM
hopkinsr2's Avatar
Join Date: Feb 2005
Location: canada
Posts: 1,561
When you say "NEW" do you mean New, or new to you!! If it's new, Call Sears & have them fix it. Better they get there hands cold, & also, a lot of these box machines aren't set up properly on assembly & cause problems. If it's still warranty, call, as a lot of companys don't like us looking @ our machines!! Roger

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes