new auger belt
#1
Member
Thread Starter
Join Date: Feb 2008
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
new auger belt
just put a new auger belt on my craftsman snowblower model c459 the problem I am havingis that there seems to be alot of slack in this belt. does anyone have or know the routing of this belt. it maynot have been properly mounted when I removed it.If it is properly mounted is there anyway to take up the slack.
any help would be appreciated thanks
any help would be appreciated thanks
Last edited by macho; 03-05-08 at 07:43 PM. Reason: typos