Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

tecumseh OHV175


smenguy's Avatar
Member

Join Date: Jun 2006
Posts: 101
AL

03-24-08, 06:56 AM   #1  
tecumseh OHV175

Hi, I have a tecumseh OHV175 204807B and need to know the torque for the head bolts. Thanks for any help. susie
and thanks for all the help you have given me in the past!!
Oh Yeah, I also need to know the gap for the valves. thanks

 
Sponsored Links
GlenM's Avatar
Member

Join Date: Nov 2007
Posts: 432
OK

03-24-08, 07:27 AM   #2  
Info should be in this manual:
http://www.cpdonline.com/695244a.pdf
4 Cycle Overhead Valve
(right click, save target as, etc.)

 
smenguy's Avatar
Member

Join Date: Jun 2006
Posts: 101
AL

03-24-08, 06:16 PM   #3  
Thanks for the info but it was not my model. I have a
OHV 175 and it did not show that. Any more help would be appreciated. thanks susie

 
geogrubb's Avatar
Member

Join Date: Jun 2006
Posts: 2,333
MO

03-25-08, 09:50 AM   #4  
The site below states you can download the service manual, however I didn't try it. Have a good one. Geo
http://safemanuals.com/user-guide-in...HV175-204807B#

 
puey61's Avatar
Member

Join Date: Apr 2004
Posts: 3,224
NY

03-26-08, 07:13 PM   #5  
The manual that GlenM linked you to is only a slight bit older than the current manual available but you can use the column labeled OHV13.5-17. It will be the exact same specs as your engine.

 
GlenM's Avatar
Member

Join Date: Nov 2007
Posts: 432
OK

03-27-08, 04:13 AM   #6  
Puey's right, everything in manual will be applicable to your model,
also, the link Geo referenced will get you the exact parts list for your model.

 
Search this Thread