725r will not run when hot.
#1
Member
Thread Starter
Join Date: Apr 2008
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
725r will not run when hot.
I'm have a problem with my Ryobi 725r weedeater. When its cold it runs fine (I have to pull it 4-5 time on choke and then take it off and it starts right up). However, after it runs for some time and I stop it, it will crank and run for a couple of seconds and then stop. Could it be the module assembly going bad? Thanks.
#3
Could be the module...check for spark when it dies. If none, then the module is bad. Could also be a crankcase air leak or plugged gas cap vent. Do you have to prime and choke to re-start it?