bleeding air out of rider tranny

Reply

  #1  
Old 04-15-08, 05:41 PM
Member
Thread Starter
Join Date: Apr 2008
Posts: 6
bleeding air out of rider tranny

hey can anyone tell me how to bleed the air out of my craftsman lawn tractor tranny...changed a seal now i need to bleed the air out!!!!!!
 
Sponsored Links
  #2  
Old 04-15-08, 06:00 PM
Member
Join Date: Feb 2008
Location: Western Area
Posts: 94
If it's a hydro transmission, all you need to do is jack up the drive wheels and then operate the transmission alternating between forward and then reverse about 30 -45 seconds in each direction several times, and any air pockets will be worked out.
 
  #3  
Old 04-15-08, 06:16 PM
Member
Thread Starter
Join Date: Apr 2008
Posts: 6
yeah its a hydrostatic tranny and i will do that and thank you very much sir!!!!!!
 
  #4  
Old 04-16-08, 01:17 PM
Member
Thread Starter
Join Date: Apr 2008
Posts: 6
hey aawrench....how much do i put in there...i mean can i put to much in there or is there a certain level it has to be at????
 
  #5  
Old 04-16-08, 03:55 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,263
 
  #6  
Old 04-17-08, 05:16 AM
Member
Thread Starter
Join Date: Apr 2008
Posts: 6
thank you very much sir for the info!!!!!!
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes