Briggs & Stratton wont start

Reply

  #1  
Old 04-17-08, 05:32 PM
Member
Thread Starter
Join Date: Apr 2008
Posts: 2
Briggs & Stratton wont start

I have a Craftsman mower with a 6.5 horse Briggs on it that is about 3 years old. No gas is getting to the primer bulb or carb. If you pour some in the carb or pull the plug and put some in the cylinder it fires and runs but just until the gas you poured in is gone. I replaced the small gasket/diaphram but the bulb will not prime or get firm, no gas. What am I missing
 
Sponsored Links
  #2  
Old 04-17-08, 06:19 PM
31YTech's Avatar
Member
Join Date: Feb 2008
Location: EveryWhere
Posts: 1,263
Originally Posted by project101 View Post
What am I missing

Posting the model and type numbers off the engine so we can see exactly what your dealing with.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes