Lawn Tractor Jack/Lift

Reply

  #1  
Old 04-23-08, 05:15 AM
Member
Thread Starter
Join Date: Nov 2006
Location: South Jersey
Posts: 383
Lawn Tractor Jack/Lift

I have a Snapper 2354 Lawn Tractor. I need to sharpen the blades. I would prefer to do it without removing the deck. I have always used a floor jack and jack stands however I was wondering how other folks raise their lawn tractors to work on them.
 
Sponsored Links
  #2  
Old 04-23-08, 11:29 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,815
I usually do the floor jack/jackstands thing too. You can also use a chain hoist or come-along from a strong overhead support.
 
  #3  
Old 04-24-08, 04:30 AM
Member
Thread Starter
Join Date: Nov 2006
Location: South Jersey
Posts: 383
Cheese -- thanks.
 
  #4  
Old 04-25-08, 12:04 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,815
Anytime.

I'm sure I don't have to mention to be positive that the overhead structure is unquestionably strong enough to withstand the weight of the mower if using the hoist/come-along method. Sure as I don't say that, somebody somewhere will pull a rafter down out of their garage.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes