governor linkage question?
#1
Member
Thread Starter
Join Date: Dec 2007
Location: ND
Posts: 8
Upvotes: 0
Received 0 Upvotes
on
0 Posts
governor linkage question?
Hi, I have a tiller that was not running and so I took the carburetor apart and gave it a clean, it starts right up now which is nice, but it seems to be running fast now. I did have to take off the , not sure of the terms here but something like, the governor wire and the throttle spring wire. I made sure they were reconnected to the same holes they were on before but I am not sure if they have become crossed? If an expert somebody could take a look at the pictures below and tell me what they think that would be great. It is a Tecumseh model number LV195EA. Thanks very much.
Adam
Pics:
http://img81.imageshack.us/img81/3276/19876097kx9.jpg
http://img104.imageshack.us/img104/5407/35205130cq5.jpg
http://img511.imageshack.us/img511/7052/80856089ss3.jpg
http://img90.imageshack.us/img90/787/54920396hr9.jpg
http://img528.imageshack.us/img528/7804/73192162gq6.jpg
Adam
Pics:
http://img81.imageshack.us/img81/3276/19876097kx9.jpg
http://img104.imageshack.us/img104/5407/35205130cq5.jpg
http://img511.imageshack.us/img511/7052/80856089ss3.jpg
http://img90.imageshack.us/img90/787/54920396hr9.jpg
http://img528.imageshack.us/img528/7804/73192162gq6.jpg
#2
Member
Thread Starter
Join Date: Dec 2007
Location: ND
Posts: 8
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Should it look instead like the drawing on this site?
http://www.angelfire.com/mb2/visitme.../tecumseh.html
It is not the right model number though so I was a bit wary or are they all pretty similar?
And sorry about the picture quality, I need a new camera. If more or different ones are needed just let me know. Thanks again.
Adam
http://www.angelfire.com/mb2/visitme.../tecumseh.html
It is not the right model number though so I was a bit wary or are they all pretty similar?
And sorry about the picture quality, I need a new camera. If more or different ones are needed just let me know. Thanks again.
Adam
Last edited by AdamRAdam; 05-17-08 at 01:42 PM.
#3
Yes, it should look like the drawing in you last link. The rod with the spring on it is incorrect on your mower.