Governer linkage-TVS-90


Old 05-20-08, 07:29 AM
Thread Starter
Join Date: Jul 2006
Location: Central New Hampshire
Posts: 754
Governer linkage-TVS-90

Does anyone have a photo of the governer linkage on a Tecumseh TVS-90? I have 2 here in the shop and both customers took the carbs off and brought in the pieces (linkages & carbs) in a bag with the lawn mowers. I have looked thru the Tecumseh manuals (parts & service) and can not find a good breakdown of which holes the links go into.
There are 2 links. 1 from governer lever to carb throttle plate and 1 with a spring, from governer lever to throttle control lever. There are also 2 holes in the governer lever. Trying to figure out which holes to use.
Sponsored Links
Old 05-20-08, 07:13 PM
Join Date: Jun 2006
Location: St. Louis
Posts: 2,365
I think the link below will show you the info you need. Have a good one. Geo

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes