Excell Pressure Washer shooting h2o from top of pump

Reply

  #1  
Old 05-24-08, 01:44 PM
Member
Thread Starter
Join Date: May 2008
Posts: 1
Excell Pressure Washer shooting h2o from top of pump

Hello-

I have a Excell pressure washer (XR2625) with a Honda Engine. It starts fine, but water shoots out of the plastic "cone" on top of the pump. I'm quite sure it didn't do that before. Pressure isn't as good as it should be as a result. Does anyone know why the water is coming out of that cone?

Thanks in advance,
Bill P.
Portersville PA
 
Sponsored Links
  #2  
Old 05-24-08, 09:53 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,814
That pump is a chinese disposable pump built for a service life of 50 hours. I don't think parts are easily obtained for it. It sounds like it's coming out of the pressure safety valve, but not sure.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes