cadet yard bug trans belt replacenment

Reply

  #1  
Old 06-07-08, 08:26 AM
Member
Thread Starter
Join Date: Mar 2008
Location: Fredericksburg Va
Posts: 7
cadet yard bug trans belt replacenment

Need help with the replacenment of upper variable speed belt. How do I get the engine pully to come down so I can thread belt. Book says to use 9/16 rachet with 6" exrension but doesn't say where. I figured up through the middle of stem, but this takes a 5/8 socket. Also if this is right how do I stop the transmission from turning. Any help will be really appreciated. SHAW
 
Sponsored Links
  #2  
Old 06-08-08, 09:07 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Use the 5/8" socket to remove the engine pulley bolt. Why do you want to stop the tranny from turning?
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes