cadet yard bug trans belt replacenment
#1
Member
Thread Starter
Join Date: Mar 2008
Location: Fredericksburg Va
Posts: 7
Upvotes: 0
Received 0 Upvotes
on
0 Posts
cadet yard bug trans belt replacenment
Need help with the replacenment of upper variable speed belt. How do I get the engine pully to come down so I can thread belt. Book says to use 9/16 rachet with 6" exrension but doesn't say where. I figured up through the middle of stem, but this takes a 5/8 socket. Also if this is right how do I stop the transmission from turning. Any help will be really appreciated. SHAW
#2
Use the 5/8" socket to remove the engine pulley bolt. Why do you want to stop the tranny from turning?