Craftsman ground drive V-belt needs replaced

Reply

  #1  
Old 06-19-08, 10:30 AM
Member
Thread Starter
Join Date: Feb 2002
Posts: 38
Craftsman ground drive V-belt needs replaced

I just noticed a pretty big fissure/crack in the ground drive belt and ordered a replacement, but was wondering if replacing the ground drive belt is an easy process or should I leave it to a professional. Any ideas where to get step-by-step procedures would be greatly appreciated. Tractor = Craftsman Model 917.276240, 25hp Kohler w/54" mower deck and automatic transmission.
 
Sponsored Links
  #2  
Old 06-19-08, 04:48 PM
Member
Join Date: Jun 2008
Location: GA
Posts: 150
You can go to Sears parts online to get the owner's manual for your tractor. The instructions for replacing the belt will most likely be in the manual.

Start here:
http://www.searspartsdirect.com/part...t/index.action

Enter the model mumber, click search.

On the right side of the new page there will be a box for "Get manuals for this model".

Follow that. You'll have to register, but it's painless and doesn't cost anything.

Roger
 
  #3  
Old 06-19-08, 06:15 PM
Member
Join Date: Sep 2006
Location: Washington State
Posts: 8
No need to register.

Manual
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes