removing starter ratchet

Reply

  #1  
Old 06-21-08, 12:53 PM
Member
Thread Starter
Join Date: Jun 2008
Posts: 2
removing starter ratchet

I have read numerous posts about removing flywheel on an 8hp verticle engine but haven't found anything about how to remove the starter ratcher. Mine ratchets counter clockwise and gribs turning clockwise. How do you remove this thing to pull the flywheel? By the way, it's a 1978 Model Briggs and Stratton......Tks....
 

Last edited by captcnduit; 06-21-08 at 12:54 PM. Reason: can't type!!!
Sponsored Links
  #2  
Old 06-21-08, 05:22 PM
Member
Thread Starter
Join Date: Jun 2008
Posts: 2
....

never mind, found a socket for the starter ratchet and a flywheel strap..............I'm good to go!!!!
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes