Craftsman 2 8/25 Carb

Reply

  #1  
Old 08-22-08, 12:40 PM
Member
Thread Starter
Join Date: Aug 2008
Location: wisconsin
Posts: 3
Craftsman 2 8/25 Carb

Newer here, but familiar with forums, I searched and searched for an exact match to what I need. I have recently acquired an 8 HP Craftsman2 8/25 snowthrower. The safety key says Tecumseh Snow King, the craftsman model#768.8849 is on the plate with the serial number.

Now for the catch, there is no carb on it, and I have removed a few things in search for the motor plate. 10" auger, horizontal shaft, and with research elsewhere found that the tecumseh engine is craftsman part#143.766152 or #6291

I read through the forum stickies, did the searching, and actually started the day with confidence, and here I fins myself asking for help.
 
Sponsored Links
  #2  
Old 08-22-08, 01:10 PM
Member
Thread Starter
Join Date: Aug 2008
Location: wisconsin
Posts: 3
On top of the engine plate it has 143.766152 and SER 6216D. None of this matches any of the models listed on carburator references.

Just a little more to go off of, Thanks in advance for the help.
 
  #3  
Old 08-22-08, 01:14 PM
Member
Join Date: Dec 2007
Posts: 26
That crosses to Tecumseh model HM80 155321L.
Carburetor part number is 632334A.
That should get you started.
 
  #4  
Old 08-22-08, 02:23 PM
Member
Thread Starter
Join Date: Aug 2008
Location: wisconsin
Posts: 3
perfect start to info needed. Thank you for your time. It was found at a foreclosed house, I bought it, and I'm totally stoked about the trax drive.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes