Husqvarna won't start


Old 08-28-08, 05:57 PM
Thread Starter
Join Date: Sep 2004
Location: Philadelphia, PA
Posts: 39
Husqvarna won't start

Hi Guys, I have a husqvarna yht2148 that won't start. I think part of the problem is that I grabbed the wrong gas can with some old gas and put it in the tank. I did drain it and add fresh gas along with dry gas but it just won't start. I did verify that I have a spark and when i took out the plug and added some gas it would run but only with the choke wide open. Any suggestions would be much appreciated.
Sponsored Links
Old 08-28-08, 06:48 PM
30yearTech's Avatar
Join Date: Oct 2006
Location: Central Texas
Posts: 1,176
You may need to drop the float bowl on the carburetor, perhaps there may have been some water in your old fuel and now thats whats in the carburetor.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes