Tecumseh 8hp Exploded Parts Diagram?

Reply

  #1  
Old 08-30-08, 02:09 PM
Member
Thread Starter
Join Date: Aug 2008
Location: North Central NM
Posts: 14
Question Tecumseh 8hp Exploded Parts Diagram?

Fixing an old Sears "go-kart" style riding mower (1980s vintage) with a Tecumseh 8hp vertical shaft engine and looking for an exploded parts diagram to see how throttle linkage/governor is hooked up and other engine parts that may be missing. Trying to find a diagram on the web and . Where can I get one???
Mister Q
 
Sponsored Links
  #2  
Old 08-30-08, 06:55 PM
Member
Join Date: Feb 2008
Location: usa
Posts: 755
The downside with Tecumseh products is you just about must subscribe to their parts source software or use a dealer to obtain some part numbers. Otherwise, you will never find numbers for service parts, etc.

Here is a good site for Tecumseh parts breakdown
http://www.partstree.com/parts/?lc=tecumseh

With the Sears, model number you may be able to view a parts list at the Sears site. Part numbers will be the manufactures part numbers not Sears numbers. Any model number beginning with 143. is Tecumseh.
http://www.searspartsdirect.com/part...t/index.action

Sears source codes, or first three numbers of a Sears model number equals manufacturer
http://www.asecc.com/data/sears.html
 
  #3  
Old 08-30-08, 08:31 PM
Member
Thread Starter
Join Date: Aug 2008
Location: North Central NM
Posts: 14
Airman - Thanks again for the info. From checking out the first site you listed, the info looks like it will help me greatly.

Mr Q
 
  #4  
Old 08-31-08, 11:31 AM
Member
Join Date: Aug 2008
Location: Cuyahoga Falls, OH
Posts: 10
I have an exploded view of an HM80-155321. If you want, I will scan it and post later today.
 
  #5  
Old 08-31-08, 02:32 PM
Member
Thread Starter
Join Date: Aug 2008
Location: North Central NM
Posts: 14
Airman - I found the motor on the Parts Tree site you posted (a VM 100 series) so that solves my quest! Thanks again.

PvtPoverty - Not sure what your "HM...." refers to. Could you elaborate on what it is or for?

Thanks, Mr Q
 
  #6  
Old 08-31-08, 04:54 PM
Member
Join Date: Aug 2008
Location: Cuyahoga Falls, OH
Posts: 10
It's the model number for an 8hp horizontal shaft Tecumseh engine. Sorry, I see that you need vertical.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes