Replacing the drive belt for a craftsman yard vac.

Reply

  #1  
Old 10-08-08, 06:40 AM
Member
Thread Starter
Join Date: Oct 2008
Posts: 1
Replacing the drive belt for a craftsman yard vac.

I have a 6.5 HP craftsman yard vac model #247.770990. The tranny went and broke the belt too.I bought a new belt and tranny.Do I have to drop the whole bottom end off to get the belt on the pully?Which is located above the auger wheel and below the engine. If I do,how do I get the auger wheel off?Thanks
 
Sponsored Links
  #2  
Old 10-09-08, 12:22 AM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,817
Hopefully someone here has experience with that unit and can lend some advice. I don't believe I've ever worked on one of those.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes