Terry Mannlein
#1
Member
Thread Starter
Join Date: Dec 2008
Location: Colorado
Posts: 1
Terry Mannlein
Tecumseh HSK70 - What type of screw, bolt holds the recoil starter to the engine block??
Sponsored Links
#2
The starter assembly is held on the engine shroud by a couple of 8/32 X 21/64 screws. The shroud is held on by 4 or 5 bolts along the top of the engine I believe it's held on by 2 or 3 of the head bolts and on the lower sides of the engine by a couple 5/16 X 24 cap head screws.
«
Previous Thread
|
Next Thread
»