Poulan chainsaw bar. Is it bolted???

Reply

  #1  
Old 12-15-08, 06:49 PM
Member
Thread Starter
Join Date: Dec 2008
Posts: 1
Poulan chainsaw bar. Is it bolted???

Hello, I hope you can help... I have purchase a Poulan Pro PP4620AVX 20' bar chainsaw.The 2 bar bolts does not have any nuts to secure the bar. Should there be? Does the bar plate goes between the bar and the plastic cover and screw cap? I looked at the parts diagram and it is not clear if there are nuts for the bar bolts. Want to make sure it is safe before I operate it. Thanks in advance for your help!
 
Sponsored Links
  #2  
Old 12-15-08, 07:21 PM
Member
Join Date: Nov 2005
Location: USA
Posts: 468
Please get some help first

This model uses a tool less bar nut part number 545060102. It is safe to use if you have this part. The bar plate part number 530047855 goes between the motor and the bar. But since you are asking such basic questions you should find someone to show you how to use the saw correctly.

AJ
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes