Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Need help with atlas snowblower


baughmanross's Avatar
Member
Join Date: Dec 2008
Posts: 2

12-20-08, 03:20 PM   #1  
Need help with atlas snowblower

We have an old atlas snowblower single stage, briggs easy start, need to find a shear pin. Do you know who would carry one or something comparable? Serial # rh 001864, model # sn 420b. hope that helps.

Last edited by baughmanross; 12-20-08 at 03:37 PM. Reason: found serial #
 
Sponsored Links
indypower's Avatar
Member
Join Date: Jul 2006
Posts: 754
NH

12-20-08, 04:28 PM   #2  
Do you have a shear pin from the other auger? If so, take it out and go down to your local hardware store or snowblower dealer and ask them to match it. Shear pins basicly come in 3 different diameters 1/4, 5/16 are the 2 most common. 3rd is metric for Hondas.

 
baughmanross's Avatar
Member
Join Date: Dec 2008
Posts: 2

12-20-08, 04:35 PM   #3  
Thank you, I did just that! Hope it fits.

 
  Reply
Thread Tools
Search this Thread