Yamaha Snowmate 560 wiring issue...

Reply

  #1  
Old 12-26-08, 03:43 AM
Member
Thread Starter
Join Date: Dec 2008
Location: Misawa AB, Japan
Posts: 1
Yamaha Snowmate 560 wiring issue...

Hey everyone,

I have recently "accuired" an old snowblower from work and cant figure out how to wire it back up. It's an old tracked Yamaha that they obviously don't make anymore. I was able to order a new magneto for it but i don't see where the wires hook up. The magneto has two wires out. One is the spark plug wire. The other is about a 20awg thats about 8in long. Looking at the switch on the control panel I have two wires out of it that are also about 8in long with the same type connectors (one male, one female). Has anyone seen this setup before? Any help would be appreciated. Thanks.

-Kevin
 
Sponsored Links
  #2  
Old 12-26-08, 06:01 AM
Member
Join Date: Jul 2006
Location: Central New Hampshire
Posts: 754
This site should be able to help you:

Nabble - Yamaha Snowblower Fan Club forum
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes