dgcars

Briggs 3.75hp Carb. Springs?

I have a 3.75hp Briggs Model#98902-2247-B1. When I got the mower, the springs where gone. I bought two new springs #691297 (governor), and #691859 (governor idle). I don't know where they are positioned. Tried every way I know, But no Luck. Has anyone got a picture or diagram? Need help! Looked all over the net, but no luck!!

AAWrench

Take a look at this and see if this is what you need

http://i275.photobucket.com/albums/j...print-link.jpg

geogrubb

AAWrench;
Excellent illustration, don't loose that pic, when spring gets here that same question is going to be asked a zillion times.(thats a bunch). Have a good one. Geo

AAWrench

Posted By: geogrubb AAWrench;
Excellent illustration, don't loose that pic, when spring gets here that same question is going to be asked a zillion times.(thats a bunch). Have a good one. Geo

Heck, I think I copied it from one of your old posts..

dgcars

AA Wrench, Thanks alot. The picture is what I was looking. I had the end on the air vane link right, but my bracket was bent, so that's why I could not get the other end of the spring in the correct position. Thanks again!