Tecumseh Linkage problem
#1
Member
Thread Starter
Join Date: May 2008
Posts: 37
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Tecumseh Linkage problem
Its a OHSK55 model tecumseh motor. I got a few other numbers off it too. 69522D and YTPXS1951AP. I had to take the cover off to replace the flywheel key and i cant figure out how the linkage goes. theres a spring and a rod. i put them back how i thought they went and it works, but its not right. Just looking for a diagram to show me how. or a picutre of a similar motor governer setup. motor is on a ariens snowblower, but i know that doesnt really matter. any websites with diagrams are always good to have as a reference too.
thanks,
Jack
thanks,
Jack
#2
Member
Join Date: Dec 2008
Location: Carleton Place
Posts: 129
Upvotes: 0
Received 0 Upvotes
on
0 Posts