1984 toro S-620 snow thrower

Reply

  #1  
Old 02-02-09, 07:27 PM
Member
Thread Starter
Join Date: Feb 2009
Posts: 2
1984 toro S-620 snow thrower

Newbie here.

Model # 38162
SN 4043284

I am posting link of a picture of the carb that is installed on this machine.
My ? is which screw is the high speed and which is the low speed and how many turns out from bottomed out do they need to be set at?


Parts and Diagrams for Toro Consumer 38162, S-620 Snowthrower, 1984 (SN 4000001-4999999)
 
Sponsored Links
  #2  
Old 02-03-09, 06:12 AM
Member
Join Date: Jul 2006
Location: Central New Hampshire
Posts: 754
There should be an "H" and a "L" stamped on the housing above the screw. "H" is high, "L" is low speed. Both should be adjusted 1-1/2 turns out from bottom. This is a basic starting point. Adjust from there at 1/8 turn. Adjust low speed at idle, high speed at wide open. At idle the high speed adjustment has no effect and at wide open the low has no effect.
 
  #3  
Old 02-03-09, 02:45 PM
Member
Join Date: Jan 2009
Location: michigan usa
Posts: 2
Do a search for toro , they have an excellent site..
 
  #4  
Old 02-03-09, 03:40 PM
Member
Thread Starter
Join Date: Feb 2009
Posts: 2
Answer to ?

Originally Posted by dodad View Post
Do a search for toro , they have an excellent site..
Thanks Dodad,I found the answer to my ? on the toro Site.
You are my hero LOL.Beer 4U2
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes