Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

10 hp Tecumseh wiring (HELP)


sonofdust's Avatar
Member

Join Date: Mar 2009
Posts: 2

03-26-09, 08:32 AM   #1  
10 hp Tecumseh wiring (HELP)

I bought a new Tecumseh HM100-159473R. It has a 5/3 Amp stator with a 12 volt starter. I want to put this on the kids go kart and run lights. It has three wires. GREEN is going to a kill switch. one RED and one YELLOW. This is where im stumped.
One goes to the battery and one to the lights.
I want to run the lights off the battery but, dont know what wire charges the battery. I dont want to fry the stator.
Thanks for any help.
Sonofdust

 
Sponsored Links
aj-allen's Avatar
Member

Join Date: Nov 2005
Posts: 467
CO

03-26-09, 09:03 AM   #2  
Tecumseh

The red wire is 3 amp DC to charge the battery. The yellow wire is 5 amp AC.

AJ

 
sonofdust's Avatar
Member

Join Date: Mar 2009
Posts: 2

03-27-09, 01:29 PM   #3  
10 hp Tecumseh wiring

Mr. AJ-Allen I got your answer and wanted to thank you for your help. Thanks again...

 
Search this Thread