Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Troybilt Pony Tiller no start


GAS1026's Avatar
Member

Join Date: Apr 2009
Posts: 2

04-01-09, 03:35 PM   #1  
Troybilt Pony Tiller no start

I've got a Troybilt Pony Tiller probably 30 years old, Brigggs & stratton 5 HP Model 130292 Type 0793 01 Code 79110806...I am also have trouble starting. Have cleaned fuel tank replaced sparkplug and have no spark..trying to now find a ignition coil for this engine. Can you help me find an ignition coil for this engine?

Thank you,

 
Sponsored Links
cheese's Avatar
Forum Topic Moderator

Join Date: Jul 2001
Posts: 16,567
GA

04-01-09, 08:01 PM   #2  
298316 should be the coil number if that's what you want. There are a zillion places to get one here on the net, but most preferred would be your local small engine shop in case you get a bad one. Do not buy an aftermarket coil. Be sure what you are buying is genuine briggs, or you will probably wind up replacing it again soon.


"Who is John Galt?" - Ayn Rand (Atlas Shrugged)

God bless!


Last edited by cheese; 04-02-09 at 09:14 PM.
 
GAS1026's Avatar
Member

Join Date: Apr 2009
Posts: 2

04-02-09, 07:55 AM   #3  
I was thinking Briggs 298316 which specifies fits models 130200 thru 132900. The Briggs 397358 which you suggested fits models 133200,133700,135200 and 135700 or at least thats what I've read...Am I wrong?

 
p852pck's Avatar
Member

Join Date: May 2009
Posts: 1

05-06-09, 10:16 AM   #4  
pony start

Same here, Have Pony that wouldn't start for first time in nearly 30 years, Got 397358 as a replacement but directions are vague at least to me. Help

 
Search this Thread