sears craftsman rider start switch cut ??


Old 04-11-09, 07:56 AM
Thread Starter
Join Date: Apr 2009
Location: midwest
Posts: 1
sears craftsman rider start switch cut ??

I have a older 10hp tecumseh sear lt10 36in rider, I got with the ignition switch cut. I'm not sure where the wires go on the new switch? there is a red/black that come outa the regulator. a red wire coming of the start solonid, a white wire that goes to a switch under the deck.the new switch is labeled BAT, ACC, IGN, and one in the center no label.please advise thanks
Sponsored Links
Old 04-11-09, 09:10 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Sounds like you have an automotive type switch, not a lawnmower switch like this mower should have.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes