Craftsman Pressure Washer


Old 06-14-09, 06:39 PM
Thread Starter
Join Date: Jun 2009
Location: alabama
Posts: 1
Question Craftsman Pressure Washer

Need advise on repair of Craftsman pressure washer! Replaced water pump still no pressure when trigger is pressed on wand! What suggestions does anyone have?
Sponsored Links
Old 06-14-09, 07:48 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,982
Likes Received: 5
Did you replace the entire pump assembly (including the valve body) or just the pump part? If you replaced the whole assy, then I'd say you have a blocked hose or wand.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes