need help again
#1
Member
Thread Starter
Join Date: Feb 2009
Posts: 28
Upvotes: 0
Received 0 Upvotes
on
0 Posts
need help again
first off thanks to everyone thats answered my post to help me out. \here's another ? i finally got the new head for my briggs, got it on fired it up and it ran! 2 things puzzel me, it doesnt run really right till i pull the choke out all the way, also if i take the throttle control lever to low then put it up to high a little puff of white smoke comes out the exhaust any ideas on this one? one other note on my new head when i ordered it the tech tild me it was the #2 cyl. come to find out it was #1 there was also some other things that they screwed up on and after a long e-mail complaint and a phone call from me to a supervisor the head was completey free to me. so i guess the squeaky wheel just may get the grease after all.sometimes you can fight and win.Beer 4U2
model# 446777,type 0244E1,code 031222YG
model# 446777,type 0244E1,code 031222YG