honda GX 160

Reply

  #1  
Old 06-15-09, 07:45 PM
Member
Thread Starter
Join Date: Jun 2009
Location: Ontario, Canada
Posts: 1
honda GX 160

I have a rototiller with a Honda GX160 engine (pull start). It starts easily but it runs wide open, no matter where I set the throttle. Does anyone have any suggestions on how to slow it down?
 
Sponsored Links
  #2  
Old 06-15-09, 09:30 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,814
Can you manually turn the throttle shaft on the carb to slow it down? It could just be stuck if it hasn't been run for a while.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes