Wisconsin hard to start when hot.

Reply

  #1  
Old 06-21-09, 01:32 PM
Member
Thread Starter
Join Date: Jun 2009
Location: us
Posts: 11
Wisconsin hard to start when hot.

Wisconsin TFD runs fine..But when I shut it off,and try to start
it back up it takes forever...Which is a pain in my back,Considering its a pull start...
And also is there a condensor at my local automotive store that would Work as a replacement in my magneto?

Wico
spec # XH 1961B
Serial # 860793
Inpulse Range .29
Engine Manufacturer # Y-67
 
Sponsored Links
  #2  
Old 06-21-09, 08:02 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,813
Check the valve clearances, they may be too tight. I don't know about the condenser. If it's a regular condenser with a pigtail wire, then most any auto ignition type condenser should work.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes